[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: Code release Nanode xAP One Wire Temp
--------------000206090302000104070602
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 8bit
Hi Paul,
OK, there is certainly an issue around fixed IP and Ethershield, as well
as a couple of ifdef's required in my code. I have already started the
work to migrate to Ethercard but there are a number of functions missing
which I'll add, primarily the use of byte for the UDP buffer length and
no UDP broadcast function. Also I found I needed to set promiscous mode
in order to see all incoming xAP packets.
I'll update here when done and the source on github (moved from the
website). Hopefully tomorrow.
Lehane
On 08/02/2012 10:08, Paul Smith wrote:
>
>
>
> On 6 February 2012 09:49, Lehane Kellett <lehane@xxxxxxx
> <mailto:lehane@xxxxxxx>> wrote:
>
> Strange. I'll take another look at the version without FRAM/SRAM.
> I had another board working at the
> weekend with and without a 23K256 SRAM.
>
> Just to check you are using Arduino IDE 1.0 and all the libraries
> in the zip and you don't get an
> ERR:ENC28J60 message and it works with the test Ethershield code?
> https://github.com/thiseldo/EtherShield/blob/master/examples/EtherShield_DHCPTest/EtherShield_DHCPTest.pde
>
> I guess it may be a library dependency issue I missed.
>
> L
>
> Hi Lehane,
>
> I too have seen this problem, and by trail and error have narrowed it
> down to the Ethershield code. If i use the code from your zip, i never
> get a valid dhcp ip. even if i comment out use dhcp a put in a fixed
> ip it doesn't work. Now if i use Andy's test code it doesn't work
> either. If i then install Andy's library then his test code works, but
> your code fails to compile.
>
> I have narrowed this down to the :-
>
> void EtherShield::ES_send_udp_broadcast(uint8_t *buf, uint16_t
> datalen, uint16_t sport, uint16_t dport){
>
> send_udp_broadcast(buf, datalen, sport, dport);
> }
> In EtherSheild.cpp and .h
>
> which is missing in the latest Andy's library, i have added this into
> the library code and copied the IP_arp_udp_tpc files from your
library.
>
> your code now compiles.
>
> But when i load it to the nanode all i get is xAP B
>
> It should be noted that Andy is no longer working on the EtherSheild
> code and is instead moving over to EtherCard.
>
> http://blog.thiseldo.co.uk/?p=623
>
> Hope this helps, as i don't really know that much about coding.
>
> Regards
>
> Paul
>
>
>
>
> On 05/02/2012 19:39, Christopher wrote:
>>
>>
>> Yes, I've commented that define out. I've also tried
commenting
>> out DHCP to assign a static IP but had no luck.
>>
>> --- In xap_automation@xxxxxxx
>> <mailto:xap_automation%40yahoogroups.com>,
Lehane Kellett
>> <lehane@...> <mailto:lehane@...> wrote:
>> >
>> > Hi,
>> > Have you changed the compile time #define FRAM option?
>> >
>> > Has the board worked on Ethernet previously?
>> >
>> > Lehane
>> >
>> >
>> >
>> >
>> >
>> > On 29/01/2012 15:35, Christopher wrote:
>> > >
>> > > Thanks for posting this. I've uploaded it to my
nanode and
>> see it
>> > > attempting to get an IP address from my DHCP server
but it
>> never seems
>> > > to take it. Will this work with an off the shelf
nanode or do
>> I need
>> > > to add on a FM25256 chip on the bottom of the board?
>> > >
>> > > Thanks
>> > >
>> > > --- In xap_automation@xxxxxxx
>> <mailto:xap_automation%40yahoogroups.com>
>> > > <mailto:xap_automation%40yahoogroups.com>,
Lehane Kellett
>> <lehane@>
>> > > wrote:
>> > > >
>> > > > Whilst I haven't finished the final test around
the number
>> of sensors
>> > > > per pin, I've decided to release the code
anyway.
>> > > >
>> > > > Please feel free to improve, etc., as you see
fit.
>> > > >
>> > > > http://www.mm-wave.com/honeycottage/bsctemp.htm
for more
>> info and the
>> > > > code download.
>> > > >
>> > > > Regards,
>> > > > Lehane
>> > > >
>> > >
>> > >
>> >
>>
>
>
>
>
> --
> Paul Smith
>
> Your Local Computer Specialist, Supporting Your Business When You Need
> It Most
>
> Tel:- 0845 009 6226
>
> This email and any attachments may be confidential and/or privileged.
> Everything is intended for use of the addressee only. If you receive
> this message in error then you must not print it or pass it on to
> anyone else or use the information it contains. Please inform Phoenix
> Technology UK of the error by email or by telephoning (+44)(0)845 009
> 6226. Please then delete all copies from your system.
> If you are not the intended recipient then you must not use the
> information in the message or attachments or allow anyone else to do
so.
>
--------------000206090302000104070602
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: 8bit
<head>
<style type="text/css">
<!--
/* start of attachment style */
.ygrp-photo-title{
clear: both;
font-size: smaller;
height: 15px;
overflow: hidden;
text-align: center;
width: 75px;
}
div.ygrp-photo{
background-position: center;
background-repeat: no-repeat;
background-color: white;
border: 1px solid black;
height: 62px;
width: 62px;
}
div.photo-title
a,
div.photo-title a:active,
div.photo-title a:hover,
div.photo-title a:visited {
text-decoration: none;
}
div.attach-table div.attach-row {
clear: both;
}
div.attach-table div.attach-row div {
float: left;
/* margin: 2px;*/
}
p {
clear: both;
padding: 15px 0 3px 0;
overflow: hidden;
}
div.ygrp-file {
width: 30px;
valign: middle;
}
div.attach-table div.attach-row div div a {
text-decoration: none;
}
div.attach-table div.attach-row div div span {
font-weight: normal;
}
div.ygrp-file-title {
font-weight: bold;
}
/* end of attachment style */
-->
</style>
</head>
<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<!-- **begin egp html banner** -->
<br><br>
<!-- **end egp html banner** -->
Hi Paul,<br>
OK, there is certainly an issue around fixed IP and Ethershield, as
well as a couple of ifdef's required in my code. I have already
started the work to migrate to Ethercard but there are a number of
functions missing which I'll add, primarily the use of byte for the
UDP buffer length and no UDP broadcast function. Also I found I
needed to set promiscous mode in order to see all incoming xAP
packets.<br>
<br>
I'll update here when done and the source on github (moved from the
website). Hopefully tomorrow.<br>
<br>
Lehane<br>
<br>
<br>
On 08/02/2012 10:08, Paul Smith wrote:
<blockquote
cite="mid:CAAYxDC-pOV+RVtQSLYaQoM+1SMDJZrmFJfo_9F=9RF9J2HkCrw@xxxxxxx"
type="cite">
<span style="display:none"> </span>
<div id="ygrp-text">
<p><br>
<br>
</p>
<div class="gmail_quote">On 6 February 2012 09:49, Lehane
Kellett <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:lehane@xxxxxxx";>lehane@xxxxxxx</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="border-left:1px
#ccc solid;">
<div>
<span> </span>
<div>
<div>
<div>
<p> Strange. I'll take another look at the
version without FRAM/SRAM. I had another board
working at the<br>
weekend with and without a 23K256 SRAM.<br>
<br>
Just to check you are using Arduino IDE 1.0
and all the libraries in the zip and you don't
get an<br>
ERR:ENC28J60 message and it works with the
test Ethershield code?<br>
<a moz-do-not-send="true"
href="https://github.com/thiseldo/EtherShield/blob/master/examples/EtherShield_DHCPTest/EtherShield_DHCPTest.pde";
target="_blank">https://github.com/thiseldo/EtherShield/blob/master/examples/EtherShield_DHCPTest/EtherShield_DHCPTest.pde</a><br>
<br>
I guess it may be a library dependency issue I
missed.<br>
<br>
L</p>
</div>
</div>
</div>
</div>
</blockquote>
<div>Hi Lehane,</div>
<div><br>
</div>
<div>I too have seen this problem, and by trail and error
have narrowed it down to the Ethershield code. If i use
the code from your zip, i never get a valid dhcp ip.
even if i comment out use dhcp a put in a fixed ip it
doesn't work. Now if i use Andy's test code it doesn't
work either. If i then install Andy's library then his
test code works, but your code fails to compile.</div>
<div><br>
</div>
<div> I have narrowed this down to the
:-</div>
<div><br>
</div>
<div>
<div>void EtherShield::ES_send_udp_broadcast(uint8_t
*buf, uint16_t datalen, uint16_t sport, uint16_t
dport){</div>
<div><br>
</div>
<div><span class="Apple-tab-span"
style="white-space:pre;"> </span>send_udp_broadcast(buf,
datalen, sport, dport);</div>
<div><span class="Apple-tab-span"
style="white-space:pre;"> </span>}</div>
</div>
<div>In EtherSheild.cpp and .h</div>
<div><br>
</div>
<div>which is missing in the latest Andy's library, i have
added this into the library code and copied the
IP_arp_udp_tpc files from your library. </div>
<div><br>
</div>
<div>your code now compiles.</div>
<div><br>
</div>
<div>But when i load it to the nanode all i get is xAP
B</div>
<div><br>
</div>
<div>It should be noted that Andy is no longer working on
the EtherSheild code and is instead moving over to
EtherCard.</div>
<div><br>
</div>
<div><a moz-do-not-send="true"
href="http://blog.thiseldo.co.uk/?p=623";>http://blog.thiseldo.co.uk/?p=623</a>
</div>
<div><br>
</div>
<div>Hope this helps, as i don't really know that much
about coding.</div>
<div><br>
</div>
<div>Regards</div>
<div><br>
</div>
<div>Paul</div>
<div><br>
</div>
<div><br>
</div>
<blockquote class="gmail_quote" style="border-left:1px
#ccc solid;">
<div>
<div>
<div>
<div>
<div>
<div class="h5"><br>
<br>
On 05/02/2012 19:39, Christopher wrote:
<blockquote type="cite"> <span> </span>
<div>
<p><br>
Yes, I've commented that define out.
I've also tried commenting out DHCP to
assign a static IP but had no luck.<br>
<br>
--- In <a moz-do-not-send="true"
href="mailto:xap_automation%40yahoogroups.com";
target="_blank">xap_automation@xxxxxxx</a>,
Lehane Kellett <a
moz-do-not-send="true"
href="mailto:lehane@...";
target="_blank"><lehane@...></a>
wrote:<br>
><br>
> Hi,<br>
> Have you changed the compile time
#define FRAM option?<br>
> <br>
> Has the board worked on Ethernet
previously?<br>
> <br>
> Lehane<br>
> <br>
> <br>
> <br>
> <br>
> <br>
> On 29/01/2012 15:35, Christopher
wrote:<br>
> ><br>
> > Thanks for posting this.
I've uploaded it to my nanode and see
it <br>
> > attempting to get an IP
address from my DHCP server but it
never seems <br>
> > to take it. Will this work
with an off the shelf nanode or do I
need <br>
> > to add on a FM25256 chip on
the bottom of the board?<br>
> ><br>
> > Thanks<br>
> ><br>
> > --- In <a
moz-do-not-send="true"
href="mailto:xap_automation%40yahoogroups.com";
target="_blank">xap_automation@xxxxxxx</a>
<br>
> > <a moz-do-not-send="true"
href="mailto:xap_automation%40yahoogroups.com";
target="_blank"><mailto:xap_automation%40yahoogroups.com></a>,
Lehane Kellett <lehane@> <br>
> > wrote:<br>
> > ><br>
> > > Whilst I haven't
finished the final test around the
number of sensors<br>
> > > per pin, I've decided
to release the code anyway.<br>
> > ><br>
> > > Please feel free to
improve, etc., as you see fit.<br>
> > ><br>
> > > <a
moz-do-not-send="true"
href="http://www.mm-wave.com/honeycottage/bsctemp.htm";
target="_blank">http://www.mm-wave.com/honeycottage/bsctemp.htm</a>
for more info and the<br>
> > > code download.<br>
> > ><br>
> > > Regards,<br>
> > > Lehane<br>
> > ><br>
> ><br>
> ><br>
><br>
<br>
</p>
</div>
</blockquote>
<br>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
<br>
<br clear="all">
<div><br>
</div>
-- <br>
Paul Smith<br>
<br>
Your Local Computer Specialist, Supporting Your Business
When You Need It Most<br>
<br>
Tel:- 0845 009 6226 <br>
<br>
This email and any attachments may be confidential and/or
privileged. Everything is intended for use of the addressee
only. If you receive this message in error then you must not
print it or pass it on to anyone else or use the information
it contains. Please inform Phoenix Technology UK of the
error by email or by telephoning (+44)(0)845 009 6226.
Please then delete all copies from your system. <br>
If you are not the intended recipient then you must not use
the information in the message or attachments or allow
anyone else to do so. <br>
</div>
<!-- end group email -->
</blockquote>
<br>
<!-- **begin egp html banner** -->
<br>
<br>
<!-- **end egp html banner** -->
<div width="1" style="color: white; clear:
both;"/>__._,_.___</div>
<!-- Start Recommendations -->
<!-- End Recommendations -->
<!-- **begin egp html banner** -->
<img src="http://geo.yahoo.com/serv?s=97476590/grpId=9674343/grpspId=1705007709/msgId=4801/stime=1328701991";
width="1" height="1"> <br>
<!-- **end egp html banner** -->
<!-- **begin egp html banner** -->
<br>
<div style="font-family: verdana; font-size: 77%; border-top: 1px
solid #666; padding: 5px 0;" >
Your email settings: Individual EmailTraditional <br>
<a href="http://groups.yahoo.com/group/xap_automation/join;_ylc=X3oDMTJmcmJjN2VpBF9TAzk3NDc2NTkwBGdycElkAzk2NzQzNDMEZ3Jwc3BJZAMxNzA1MDA3NzA5BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzEzMjg3MDE5OTE-";>Change
settings via the Web</a> (Yahoo! ID required) <br>
Change settings via email: <a href="mailto:xap_automation-digest@xxxxxxx?subject=Email
Delivery: Digest">Switch delivery to Daily Digest</a> <a
href = "mailto:xap_automation-fullfeatured@xxxxxxx?subject=Change
Delivery Format: Fully Featured">Switch to Fully Featured</a>
<br>
<a href="http://groups.yahoo.com/group/xap_automation;_ylc=X3oDMTJkYzF2cjdnBF9TAzk3NDc2NTkwBGdycElkAzk2NzQzNDMEZ3Jwc3BJZAMxNzA1MDA3NzA5BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMzI4NzAxOTkx";>
Visit Your Group
</a>
<a href="http://docs.yahoo.com/info/terms/";>
Yahoo! Groups Terms of Use
</a>
<a href="mailto:xap_automation-unsubscribe@xxxxxxx?subject=Unsubscribe";>
Unsubscribe
</a>
<br>
</div>
<br>
<!-- **end egp html banner** -->
<div style="color: white; clear:
both;"/>__,_._,___</div>
</body>
</html>
--------------000206090302000104070602--
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|