Re: Code release Nanode xAP One Wire Temp

["Christopher" <lightningboltz@xxxxxxx>]

Thanks for posting this.  I've uploaded it to my nanode and see it
attempting to get an IP address from my DHCP server but it never seems to
take it.  Will this work with an off the shelf nanode or do I need to add
on a FM25256 chip on the bottom of the board?

Thanks



--- In xap_automation@xxxxxxx, Lehane Kellett <lehane@...> wrote:
>
> Whilst I haven't finished the final test around the  number of sensors
> per pin, I've decided to release the code anyway.
>
> Please feel free to improve, etc., as you see fit.
>
> http://www.mm-wave.com/honeycottage/bsctemp.htm
for more info and the
> code download.
>
> Regards,
> Lehane
>




------------------------------------