[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Raspberry Pi xAP Hub
- Subject: Re: Raspberry Pi xAP Hub
- From: "poulton_s" <webworm@xxxxxxxxx>
- Date: Sat, 16 Jun 2012 14:37:17 -0000
OneWire, or 1-Wire ? Out of interest how are you planning to interface the
Pi to the bus.
I've had success with both USB & i2c adaptors using OWFS (One-Wire
FileSystem).
Take a look at my blog
http://raspberrypi.homelabs.org.uk/category/1-wire/
I'm also working on a 1-wire adaptor board, which is 90% complete so if you
have any input on features you'd like to see I'd welcome them.
Stuart
--- In xap_automation@xxxxxxx, "g8kmh" <lehane@...> wrote:
>
> If anyone is interested I have a working (at least as far as I can
tell...) xAP Hub for the Pi. Next step is some OneWire.
>
> http://www.mm-wave.com/xappihub.png
>
> Compiled under GNU/Codesourcery C++ for the ARM11 if anyone wants the
elf binary.
>
> Lehane
>
------------------------------------
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|
