[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: xPL Progress so far
- Subject: RE: xPL Progress so far
- From: Tony Tofts
- Date: Fri, 05 Sep 2003 16:07:00 +0000
> On a technical note if you have several xPL apps running as a
> service. Does the xplHal on need to be started up first so
> that the hub starts or does it not matter when the hub starts
> up relative to the other apps?
Until they all start talking nothing much happens, so the order isn't that
important.
E.g. xpl_tts starts, and sends config.basic messages
Xplhal starts, starts it's hub (could also be a separate hub), the xpl_tts
config message gets thru to xplhal and it get's configured.
As the config messages are sent at 1 minute intervals, it means at most a 1
minute delay until an app/device gets configured. App's/devices started
after hub/xplhal started will get configured immediately.
Regards
Tony
xPL Main Index |
xPL Thread Index |
xPL Home |
Archives Home
|