Re: trouble with RioPlay xPL 1.2

[t_dawg123]

--- In <a
href="/group/ukha_xpl/post?postID=P-GYDHw1nJ0BlnUo2UWBlMtkebVkSyNqD7TF3lFJuWfv19PKf4RBZd-luacDKxQp-zmFDONy30O4rij2GB8a">ukha_xpl@xxxxxxx</a>,
"Tony Tofts" <tony@x> wrote:
> > config window, where you can set a new instance and give it
> > the ip etc of the server.
>
> Correction, it discovers the ip address of the server automatically
of
> course

I am not so sure this is happening for me. I can't see the rio
screen and my neighbor told me it says "searching for server" and
stays at this point.

I am sure I'm not using teh new xpl_monitor, I'll get that in a bit.
>
> The non-standard xpl config items for rioplayxpl are
> zone=lounge
> osd=tonyt-tivoosd.lounge
> tts=192.168.1.50:48000
>
> When 'zone' is set to something, then key presses on the rio remote
control
> send out xpl remote.basic messages
>
> When 'osd' is set to the source of a tivo, then the menus are
displayed on
> the tivo.
> (I'm planning a multi-line windows pop-up that will support the
osd.tivo
> schema, so that a pc can be used to display the menu as well. Also
on the
> todo list is an xpl 'menu' server. In this you'll be able to define
a menu
> of options, set the display device, and any xpl app or device will
be able
> to display a menu without the need to have the coding built-in)
>
> When 'tts' is set to the ip:port address of xpl_riotts (or a web
server)
> then it will allow announce= or targeted xpl tts messages to be
actioned
>
> Just vpn'd the house, but all my rio's are powered right off at the
moment
> (I'm in the middle of moving them around) so can't check the web
server
> remotely.
>
> Regards
> Tony