Re: Connecting the tvosd to the network

[Steve Cooper]

Frank,

FMA> i have a spare mss100 unit and i would like to connect my tvosd
unit
FMA> to the network but im not sure how to get it to work in th xpl
FMA> enviroment...Unlike Ians vfd unit which has a com port selection in
the
FMA> configuration so you can configure the mss100 unit to the com port
the vfd
FMA> is set for.....my tvosd unit doesnt have a com port
selection.....Steve how
FMA> did you do yours ????

Here is how mine works. I have the mss100 setup to be virtual com12.
Then I have the tvosd connected to the mss100. On the PC side I have
a tony's DEVCOM program, the basic framework program which just does serial
pass through. This has config items for comport, baud etc. I then set
the mss100 to 9600,8,1,none,remote,none and then set the devcom
program up the same.

That's it really the devcom program picks up the xpl messages and
sends them through to com12 (the mss100 unit) which in turn send them
to the tvosd and the reverse for messages coming back.

--
Steve
<a
href="/group/ukha_xpl/post?postID=CxTdckwlRkB2RuQ0MvqtPt6JtIf6xeg1xYsMtXvpt4XEuAVWor2yUAUlTrvA6I8GXU21rvS_z6CD62CFHHofSg4">scoop@g...</a>