The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Connecting the tvosd to the network


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Connecting the tvosd to the network


  • Subject: Re: Connecting the tvosd to the network
  • From: Frank Mc Alinden
  • Date: Tue, 13 Apr 2004 08:18:00 +0000

Hi All
Must say im very impressed that you can run many versions of Tonys
Devcom on a pc as this will allow lots of little serial devices to be
network enabled ....Been wondering how the hell i was going to connect the
Probe Hub once i get round to xPLling it..................
Nice One Tony ;-))

Now we have vfdosd pcosd tvosd tivosd......anybody done lcdosd...????;-))

Anybody got the pinouts for the mss10 db25.....i assumed it was pin 3 and 7
...???

Been using a db25/db9 and works ok but now need to use a db25 and the
above pinouts doesnt seem to work....
Thanks
Frank


----- Original Message -----
From: "Frank Mc Alinden" <<a
href="/group/ukha_xpl/post?postID=BQfHb0K6SkirApjhscIIJRSQfP3_g0N4tGtKHeIlUyzP9cNAmJnEdQYZ18WlL7lkNuMymQ1VjT2iU6kV1cSUN_BI">fmcalind@b...</a>>
To: <<a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>>
Sent: Monday, April 12, 2004 11:12 PM
Subject: Re: [ukha_xpl] Connecting the tvosd to the network


> All ok
> Not sure exactly how but i think maybe because i renamed one as
> .default i was able to have another devcom running.....Anyway the
tvosd is
> on the network ....
> im a network guru .......stop laughing you lot !!!.....;-)))
> Frank
> ----- Original Message -----
> From: "Frank Mc Alinden" <<a
href="/group/ukha_xpl/post?postID=BQfHb0K6SkirApjhscIIJRSQfP3_g0N4tGtKHeIlUyzP9cNAmJnEdQYZ18WlL7lkNuMymQ1VjT2iU6kV1cSUN_BI">fmcalind@b...</a>>
> To: <<a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>>
> Sent: Monday, April 12, 2004 8:30 PM
> Subject: Re: [ukha_xpl] Connecting the tvosd to the network
>
>
> > Hi Ian
> > I did as you suggested and renamed the source file in the second
> > folder but when i open both devcoms they have the same name and
of
course
> > only one listed in the xpl device list.....??
> > Frank
> > ----- Original Message -----
> > From: "Ian Lowe" <<a
href="/group/ukha_xpl/post?postID=eAlXmR7lELhQfzZdbCmpaZ8JXCE7NcJilla-3VD1JSDo4fXsfDxQtNahvV1O44dlRBE6IhSHErM8za8_">ian@w...</a>>
> > To: <<a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>>
> > Sent: Monday, April 12, 2004 8:02 PM
> > Subject: RE: [ukha_xpl] Connecting the tvosd to the network
> >
> >
> > > Stick it in another folder Frank -
> > >
> > > The apps use a file called "source.cfg" in the
directory beside
> > > themselves to store their instance. If you create another
folder,
stick
> > > the devcom program in it, and run it from there, it should
come up
> > > fresh, ready for install.
> > >
> > > Ian.
> > >
> > > -----Original Message-----
> > > From: Frank Mc Alinden [mailto:<a
href="/group/ukha_xpl/post?postID=BQfHb0K6SkirApjhscIIJRSQfP3_g0N4tGtKHeIlUyzP9cNAmJnEdQYZ18WlL7lkNuMymQ1VjT2iU6kV1cSUN_BI">fmcalind@b...</a>]
> > > Sent: 12 April 2004 09:56
> > > To: <a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>
> > > Subject: Re: [ukha_xpl] Connecting the tvosd to the network
> > >
> > > Hi Steve
> > >
> > > > Yes you can run as many as you like, just give them
different
> > > > instances.
> > > Tried opening another devcom but it automatically takes the
instance
of
> > > the
> > > existing one so only one is shown in the xpl devices
;-((.......
> > > Frank
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Steve Cooper" <<a
href="/group/ukha_xpl/post?postID=ckBDiSXFl1umcFwm547s9AhJtvEqSYn8DyYU8GMiHBuGRhEtxJ2E9xlXUHh10RNNzNVBrbBPF0dD_YRtQQ">scoop@g...</a>>
> > > To: "Frank Mc Alinden" <<a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>>
> > > Sent: Monday, April 12, 2004 6:08 PM
> > > Subject: Re: [ukha_xpl] Connecting the tvosd to the network
> > >
> > >
> > > > Frank,
> > > >
> > > > FMA> I should have given more info.....
> > > > FMA> I use the devcom on my serial port 1or 2 and
use it for xPL
> > > developement so
> > > > FMA> if i allocate it to a virtual port then i cant
use it???
possible
> > > to
> > > run 2
> > > > FMA> devom programs ??
> > > >
> > > > Yes you can run as many as you like, just give them
different
> > > > instances.
> > > >
> > > > --
> > > > Steve
> > > > <a
href="/group/ukha_xpl/post?postID=ckBDiSXFl1umcFwm547s9AhJtvEqSYn8DyYU8GMiHBuGRhEtxJ2E9xlXUHh10RNNzNVBrbBPF0dD_YRtQQ">scoop@g...</a>
> > > >
> > > >
> > > >
> > > >
> > > > xPL Links: <a href="http://www.xplproject.org.uk";>http://www.xplproject.org.uk</a>
<a href="http://www.xplhal.com";>http://www.xplhal.com</a>
> > > <a href="http://www.xpl.myby.co.uk";>http://www.xpl.myby.co.uk</a>
> > > > To Post a Message: <a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>
> > > > To Subscribe: <a
href="/group/ukha_xpl/post?postID=CVgqaTy3r8Xac8Qf_OPiOowQwFlDyj8WnyA-0n5mvGuWTdzRrTf7ogA5kWaFNv4E84-ulUNTLK7so91BRg-RSRaGHKhhz0ffDA">ukha_xpl-subscribe@xxxxxxx</a>
> > > > To Unsubscribe: <a
href="/group/ukha_xpl/post?postID=2FIJedrDWv4fjlgbatjIWJJ6OAcVwo6FWNDVJ2MIC_uDJxcXpxN7h9fkR-vRrLsWscAaj81DVFd1D2CYadQj1zZ-IF8dS92yTgx5pew">ukha_xpl-unsubscribe@xxxxxxx</a>
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > xPL Links: <a href="http://www.xplproject.org.uk";>http://www.xplproject.org.uk</a>
<a href="http://www.xplhal.com";>http://www.xplhal.com</a>
> > > <a href="http://www.xpl.myby.co.uk";>http://www.xpl.myby.co.uk</a>
> > > To Post a Message: <a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>
> > > To Subscribe: <a
href="/group/ukha_xpl/post?postID=CVgqaTy3r8Xac8Qf_OPiOowQwFlDyj8WnyA-0n5mvGuWTdzRrTf7ogA5kWaFNv4E84-ulUNTLK7so91BRg-RSRaGHKhhz0ffDA">ukha_xpl-subscribe@xxxxxxx</a>
> > > To Unsubscribe: <a
href="/group/ukha_xpl/post?postID=2FIJedrDWv4fjlgbatjIWJJ6OAcVwo6FWNDVJ2MIC_uDJxcXpxN7h9fkR-vRrLsWscAaj81DVFd1D2CYadQj1zZ-IF8dS92yTgx5pew">ukha_xpl-unsubscribe@xxxxxxx</a>
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > xPL Links: <a href="http://www.xplproject.org.uk";>http://www.xplproject.org.uk</a>
<a href="http://www.xplhal.com";>http://www.xplhal.com</a>
> > <a href="http://www.xpl.myby.co.uk";>http://www.xpl.myby.co.uk</a>
> > > To Post a Message: <a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>
> > > To Subscribe: <a
href="/group/ukha_xpl/post?postID=CVgqaTy3r8Xac8Qf_OPiOowQwFlDyj8WnyA-0n5mvGuWTdzRrTf7ogA5kWaFNv4E84-ulUNTLK7so91BRg-RSRaGHKhhz0ffDA">ukha_xpl-subscribe@xxxxxxx</a>
> > > To Unsubscribe: <a
href="/group/ukha_xpl/post?postID=2FIJedrDWv4fjlgbatjIWJJ6OAcVwo6FWNDVJ2MIC_uDJxcXpxN7h9fkR-vRrLsWscAaj81DVFd1D2CYadQj1zZ-IF8dS92yTgx5pew">ukha_xpl-unsubscribe@xxxxxxx</a>
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > xPL Links: <a href="http://www.xplproject.org.uk";>http://www.xplproject.org.uk</a>
<a href="http://www.xplhal.com";>http://www.xplhal.com</a>
> <a href="http://www.xpl.myby.co.uk";>http://www.xpl.myby.co.uk</a>
> > To Post a Message: <a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>
> > To Subscribe: <a
href="/group/ukha_xpl/post?postID=CVgqaTy3r8Xac8Qf_OPiOowQwFlDyj8WnyA-0n5mvGuWTdzRrTf7ogA5kWaFNv4E84-ulUNTLK7so91BRg-RSRaGHKhhz0ffDA">ukha_xpl-subscribe@xxxxxxx</a>
> > To Unsubscribe: <a
href="/group/ukha_xpl/post?postID=2FIJedrDWv4fjlgbatjIWJJ6OAcVwo6FWNDVJ2MIC_uDJxcXpxN7h9fkR-vRrLsWscAaj81DVFd1D2CYadQj1zZ-IF8dS92yTgx5pew">ukha_xpl-unsubscribe@xxxxxxx</a>
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
>
> xPL Links: <a href="http://www.xplproject.org.uk";>http://www.xplproject.org.uk</a>
<a href="http://www.xplhal.com";>http://www.xplhal.com</a>
<a href="http://www.xpl.myby.co.uk";>http://www.xpl.myby.co.uk</a>
> To Post a Message: <a
href="/group/ukha_xpl/post?postID=Z7JLvOKKskuc7stjMmYegk0u-smPi4m5PxWB6ycyUAbfIprGEGgpjMBP6GpDuMcdk-WvhpgFHMHkw12PtMDduyV3">ukha_xpl@xxxxxxx</a>
> To Subscribe: <a
href="/group/ukha_xpl/post?postID=CVgqaTy3r8Xac8Qf_OPiOowQwFlDyj8WnyA-0n5mvGuWTdzRrTf7ogA5kWaFNv4E84-ulUNTLK7so91BRg-RSRaGHKhhz0ffDA">ukha_xpl-subscribe@xxxxxxx</a>
> To Unsubscribe: <a
href="/group/ukha_xpl/post?postID=2FIJedrDWv4fjlgbatjIWJJ6OAcVwo6FWNDVJ2MIC_uDJxcXpxN7h9fkR-vRrLsWscAaj81DVFd1D2CYadQj1zZ-IF8dS92yTgx5pew">ukha_xpl-unsubscribe@xxxxxxx</a>
> Yahoo! Groups Links
>
>
>
>
>






xPL Main Index | xPL Thread Index | xPL Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.