[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Configuring CM12 service
- Subject: RE: Re: Configuring CM12 service
- From: "Ian Lowe" <ian@xxxxxxxxxxxxxxxxxx>
- Date: Sun, 8 Aug 2004 16:43:56 +0100
Couple of things Mal -
It's worth checking for anything in the event log - the CM12 service is
pretty chatty, also (probably more importantly) make sure that the CM12
service is marked as configured in xplHal manager?
If you look under xPL Devices > awaiting configuration, the CM12 should
no longer be listed - it should be under "xPL devices".
I had the odd issue with the .net services to start with - the good news
of course is that once installed, it's pretty bulletproof :)
Ian.
-----Original Message-----
From: Mal Lansell [mailto:mlansell@xxxxxxx]
Sent: 08 August 2004 14:42
To: ukha_xpl@xxxxxxx
Subject: [ukha_xpl] Re: Configuring CM12 service
Hmm, I've tried that now, but still with the same result - I can
receive from the powerline, but not send :-(
Mal
--- In ukha_xpl@xxxxxxx, "Mal Lansell" <mlansell@f...>
wrote:
>
> I'm going to install xPL on another machine (the one with my
> development environment) and see if it makes any difference.
>
> Mal
>
xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
http://www.xpl.myby.co.uk
To Post a Message: ukha_xpl@xxxxxxx
To Subscribe: ukha_xpl-subscribe@xxxxxxx
To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
xPL Main Index |
xPL Thread Index |
xPL Home |
Archives Home
|