[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: xPLComfort hanging
Hi Rob,
> I'm still having no luck :-(
>
> Should I expect to see a LU01 in the log after sending a keypad
> command?
You'll only see a LU command when xPL Comfort fires up initially - as
that's when it logs in.
>
> I'm using ACE-Comfort to test my setup and after logging in, if I hit
> the # key I get a "there are no messages" from the UCM. But
in
> xPLComfort if I send a 0C digit I get no response and nothing in the
> log either.
>
> If you have time could you add logging for all messages sent and
> received?
All communications between xPL Comfort and the UCM are already logged - so
if it's not listed in the log, then it's not being send out to the UCM.
I've just sent the following message to my Comfort:
xpl-cmnd
{
hop=1
source=xpl-xplhal.mercury
target=johnb-comfort.jupiter
}
control.basic
{
device=keypad
type=digit
current=0C
}
And got the following in the logs:
21/Oct/2004 21:57:48 Sending to comfort: KD0C
21/Oct/2004 21:57:48 Received: OK
Which looks correct to me.
What are you using to send your xPL message?
Regards,
John
xPL Main Index |
xPL Thread Index |
xPL Home |
Archives Home
|