RE: Craplins RJ45 Splitter

[Kenneth Watt]

Sorry Keith poor terminology by yours truly, it is the Maxview TP727
Double Adaptor not a splitter as such, I worded it wrongly...oops :-)

Okay, what resistors removed? Bear in mind here that, whilst my
knowledge of electronics is getting slightly better through UKHA_D, I'm
not the greatest with them little bits ;-)

What I have is one of the doublers plugged into a KAT5 TX with a doubler
on the front, one CAT5 goes to an RX in the lounge and one goes to an RX
in the bedroom but I did not open the case! This is something I wouldn't
do without instruction to do so.

K.

> -----Original Message-----
> From: Keith Doxey [mailto:<a
href="/group/kat5-users/post?postID=6p1x5-sp4zcGC6675RoI11RBaqKEcqId2gnpXq5ExzKlPmJwtr3fH6PLNrPOrwSpmU4F4vdS2_LIJLKH-Gb3lzKe">keith.doxey@b...</a>]
> Sent: 24 March 2002 21:54
> To: <a
href="/group/kat5-users/post?postID=FjRZ3dP3OjMjjNPCAb_UrlMfN__lTPSpVgb9jMTdAv8C6zX7ze0V2R2xMo7LNZe-kBckAPgewree1eDvAga0T5R6-cA">kat5-users@xxxxxxx</a>
> Subject: RE: [KAT5] Craplins RJ45 Splitter
>
> Interesting :-(
>
> Sound as if the one you got was a SPLITTER not a DOUBLER which was
what I
> was worried about in the first place.
>
> The ones I received were made by MAXVIEW (TP727)
>
> Packaged in a green blister pack.
>
> Can you use a multimeter to tap out the connections and see what they
are.
> If they are not the same as mine then I would suggest that Maplin
should
> refund as they are not what they claim to be.
>
> "PU96E RJ45 Double Adapters £3-99"
>
> Not RJ45 SPLITTER.
>
> You do still need to DAISY CHAIN the units and intermediate ones must
have
> the termination resistors removed.
>
> Keith
>
> -----Original Message-----
> From: Kenneth Watt [mailto:<a
href="/group/kat5-users/post?postID=UgYfKU1-tFy0lJ3lzIDyLpXELIrKwnL7BDboaLWiSazNAN53I6eGVrqQR5B6Pz2gTawCbyiN2y9d47pXdh9jGg">kennwatt@b...</a>]
> Sent: 24 March 2002 21:27
> To: <a
href="/group/kat5-users/post?postID=FjRZ3dP3OjMjjNPCAb_UrlMfN__lTPSpVgb9jMTdAv8C6zX7ze0V2R2xMo7LNZe-kBckAPgewree1eDvAga0T5R6-cA">kat5-users@xxxxxxx</a>
> Subject: [KAT5] Craplins RJ45 Splitter
>
>
> I ordered up a few of the RJ45 splitters that were mooted about this
> week and they arrived on Saturday morning.
>
> Finally got around to trying one tonight and it doesn't work, or at
> least appears not to here. It introduces one hell of a noise from the
> right channel on sound and the video on one set was very discoloured
by
> reds on one set while just appearing darker than it should on the
other.
>
>
> Ho hum, back to waiting on the mail that tells me that the switcher is
> complete ;-)
>
> K.
>
>
>
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=L2yIbbIHfTjM__mHQJHdlmWaPWikXYvKAjAnFhguTXx_-qbMDOrCp_g01dd3h9ThvtLnENr_OSgX9Tlao3lGSsUD_YHLJK6CrG1R">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
<a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=L2yIbbIHfTjM__mHQJHdlmWaPWikXYvKAjAnFhguTXx_-qbMDOrCp_g01dd3h9ThvtLnENr_OSgX9Tlao3lGSsUD_YHLJK6CrG1R">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
<a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
>