Re: Multidrop KAT5 AV Daisy Chain

[Mark Fulford]

Keith

I currently use a SCART switchbox. The downside is that only one source is
available at a time. Will your switcher require separate CAT5 cables for
each
source and/or receiver, or will you be able to piggy back multiple signals
in
the same cable?

Mark Fulford
----- Original Message -----
From: Keith Doxey
To: <a
href="/group/kat5-users/post?postID=nMdWXrAj8vBUHNsVO-xsJeiT4t_SOaa_2_vKmJwlJLIrfXYbIWt-n3QnM1wirTMKOZMOljMAR32UhC2YsRToXw">kat5-users@xxxxxxx</a>
Sent: Tuesday, June 03, 2003 1:07 PM
Subject: RE: [KAT5] Multidrop KAT5 AV Daisy Chain


Hi Neil,

The Daiychaining cannot be done at the patch panel because that would be
Star Wiring.

At Video frequencies it is essential that a cable is correctly terminated
at
the end of its run to prevent reflection of the signal which at best will
cause ghosting and at worst, render the picture totally unwatchable.

If you have the cables commoned at the patch panel you will have two long
lengths of cable running to the receivers. One of thes will be terminated
but the other will not and will cause reflections that will ruin the image.
Terminating both cables is not an option as there will the transmitter will
see a double termination and the signal levels will be incorrect.

If you have multiple sources you can wire them to a SCART Switchbox before
going into the transmitter. I am currently working on a multizone,
multisource switcher to act as an AV hub for KAT5 and when this is release
Multidrop will no longer be required as all rooms will be able to select
whichever source they wish to view.

Hope that helps

Keith

www.diyha.co.uk
www.kat5.tv


> -----Original Message-----
> From: ndavdra [mailto:<a
href="/group/kat5-users/post?postID=yvM81Dq0A4g-MBbq83DYSwLLP8gSH7rsziwFEcNMZrb12xVG5Mx4dBS6HzjztmS_iT7VtbbNTqH3Ow">ndavdra@h...</a>]
> Sent: 03 June 2003 12:45
> To: <a
href="/group/kat5-users/post?postID=nMdWXrAj8vBUHNsVO-xsJeiT4t_SOaa_2_vKmJwlJLIrfXYbIWt-n3QnM1wirTMKOZMOljMAR32UhC2YsRToXw">kat5-users@xxxxxxx</a>
> Subject: [KAT5] Multidrop KAT5 AV Daisy Chain
>
>
> Can someone please advise what would stop the daisy chaining taking
> place at the patch panel so that 2 cat5 sockets would not have to be
> used? What would happen if you have multiple sources i.e. DVD, SAT ?
>
> Thanks
> Neil
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Get A Free Psychic Reading! Your Online Answer To Life's
> Important Questions.
> <a href="http://us.click.yahoo.com/Lj3uPC/Me7FAA/ySSFAA/26EolB/TM";>http://us.click.yahoo.com/Lj3uPC/Me7FAA/ySSFAA/26EolB/TM</a>
> --------------------------------------------------------------
> -------~->
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=HTkTNDQlcPcuLxfQG3VayoH-OVPDhJGuaVl6_YF9r7QUAT4_jqG6L1bs60N-Gra4CDk3Bsb4o_C2ZljRfnMfPXNM9vEWg2UJqQ">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
> <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
>