[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Multidrop KAT5 AV Daisy Chain
- Subject: RE: Multidrop KAT5 AV Daisy Chain
- From: Keith Doxey
- Date: Tue, 03 Jun 2003 14:56:00 +0000
Hi Mark,
The switcher will require
1 CAT5 cable per input source
1 CAT5 cable per output zone
All 4 pairs in the cable are used to there is no possibility of carrying
more than 1 source per cable. The IR and switcher control signals will also
pass over the same cables
Keith
www.diyha.co.uk
www.kat5.tv
> -----Original Message-----
> From: Mark Fulford [mailto:<a
href="/group/kat5-users/post?postID=IMBtkvIkAagRxJ7Sn5HvmN15IZkCf27yWTyGPuYqMHhIgdueO9Hx2K_sbuWLjbS-u2yz-6KRCY-i">mark@v...</a>]
> Sent: 03 June 2003 14:26
> To: <a
href="/group/kat5-users/post?postID=ifVSGBxkgpb553sGgO6GnjJ2uIZv0dzPFniEXCwc5XDG90ZEDCsfCS1LBQxhmRgkcmQqnv1HZoD9pEeQkKS5Ow">kat5-users@xxxxxxx</a>
> Subject: Re: [KAT5] Multidrop KAT5 AV Daisy Chain
>
>
> Keith
>
> I currently use a SCART switchbox. The downside is that only
> one source is available at a time. Will your switcher require
> separate CAT5 cables for each source and/or receiver, or will
> you be able to piggy back multiple signals in the same cable?
>
> Mark Fulford
KAT5 Main Index |
KAT5 Thread Index |
KAT5 Home |
Archives Home
|