[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: CAT 5 for new-build --- how many per room?
- To: <ukha_d@xxxxxxx>
- Subject: Re: CAT 5 for new-build --- how many per room?
- From: "Dr John Tankard" <jtankard@xxxxxxx>
- Date: Mon, 19 Jul 1999 13:53:00 +0100
- Delivered-to: listsaver-egroups-ukha_d@xxxxxxx
- Mailing-list: contact ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Good afternoon Rick,
I have used F series skts in rooms (RS 483-051 36p each), they are
recommended by the dish installers, I have to say they are a bit cheap and
nasty, but they work. I used blank plates and drilled them. Actually the
ones I had have a knock out in the correct place and it was only
fractionally under size.
A friend has recommended the AMP M/A-COM range, and they do look very nice,
have a very high spec but the same part as above costs £13.80 !
John
jtankard@xxxxxxx
> -----Original Message-----
> From: Rick Hughes [mailto:rhughes@xxxxxxx]
> Sent: 19 July 1999 12:45
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: CAT 5 for new-build --- how many per room?
>
>
> Are you expecting the digital video to go down the cat 5 ?? I have
> understood that this is not the case and had planned on running CT125
to
> each room as well. Although not found out what to use as a coax
outlet
> yet (anybody any comments on that) nor at the patch panel end.
>
------------------------------------------------------------------------
MyPoints-Free Rewards When You're Online.
Start with up to 150 Points for joining!
http://clickhere.egroups.com/click/475
eGroups.com home: http://www.egroups.com/group/ukha_d
http://www.egroups.com - Simplifying
group communications
Home |
Main Index |
Thread Index
|