[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Roll-your-own X10 problems
- To: ukha_d@xxxxxxx
- Subject: Re: Roll-your-own X10 problems
- From: "K. C. Li" <lbs@xxxxxxx>
- Date: Tue, 9 Nov 1999 10:21:15 -0500 (EST)
- Delivered-to: rich@xxxxxxx
- Delivered-to: listsaver-egroups-ukha_d@xxxxxxx
- Mailing-list: contact ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
On Tue, 9 Nov 1999, Ant Skelton wrote:
> which way around are the dim levels? 0000=off, 1111=full ?
Sorry, I didn't make it clear on that. The 4-bit DIM command code is fixed
at 0100b (BRIGHT 0101b) but there are 16 levels of brightness to be obeyed
by the modules on receiving Bright/Dim commands. ie. A lamp module would
dim by 1/16th of full brightness for every DIM command received and the
other way round for BRIGHT. Please note that these commands are operating
relative to the current brightness setting on the module.
Regards,
Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com
------------------------------------------------------------------------
-- Check out your eGroup's private Chat room
-- http://www.egroups.com/ChatPage?listName=ukha_d&m=1
Home |
Main Index |
Thread Index
|