The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Webserver interface


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Audio Cable dilemma


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Audio Cable dilemma
  • From: "M McAree Jr" <michael.mcaree@xxxxxxx>
  • Date: Wed, 14 Jun 2000 17:09:47 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I like the masking tape idea Paul. The skirting is just varnished and the
walls painted. Just got the room replastered a few months ago - well before
I got into HA etc. I put the feelers out regarding the painted masking tape
idea, but I think it just might fly :-)

Michael
BELFAST

> -----Original Message-----
> From: paul gordon [mailto:paul_gordon@xxxxxxx]
> Sent: 14 June 2000 16:02
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Audio Cable dilemma
>
>
>
> >As you all know any form of cabling is not Wife-Friendly but my
> problem is
> >that I have to cable my surround speakers around the skirting
board and
> >door
> >frame to position them in the room. I have solid floors and a
> wooden floor
>
> Do you have the skirting painted white?
>
> In my house, I have been able to run the speaker cable under
> floors, and had
> a lot plastered into the walls, but there are still a few places
(rooms I
> haven't renovated yet), where I also have to run speaker cables along
the
> skirting board. I have found that the white plastic trunking
> available from
> any of the DIY sheds is almost invisible when secured along the
> top edge of
> the skirting - my skirting boards are just "planks" with a
square
> top - if
> you have bullnose / chamfered / ogee profiled skirting, you may
> have to fix
> it to the face of the board, running it along the floor. - I have
> done both,
> and results are fully wife-approved....
>
> Another trick I have used, but it only works if you have emulsioned
walls
> (and you sill have some of the original emulsion left) is to run
> cables in
> the corner joins either in the corner of the room, or in the
> 90-degree join
> between the wall and the door architrave, then stick it down with
masking
> tape, and emulsion over it with the original paint. I have done
> this in one
> instance where I decided to move a pair of speakers to a new
> location where
> I had not previously thought to run spare cables in the walls, and the
> results are again almost totally invisible and fully
> wife-approved. Results
> are best if you have a textured wallpaper like Anaglypta.
>
> HTH.
>
> Paul G.
>
>
________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
>
------------------------------------------------------------------------
> Get a NextCard Visa, in 30 seconds!
> 1. Fill in the brief application
> 2. Receive approval decision within 30 seconds
> 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
> http://click.egroups.com/1/5197/7/_/2065/_/960994955/
>
------------------------------------------------------------------------


------------------------------------------------------------------------
Was the salesman clueless? Productopia has the answers.
http://click.egroups.com/1/4633/7/_/2065/_/960999006/
------------------------------------------------------------------------




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.