[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Cliping cable to external (brick) walls.
- To: <ukha_d@xxxxxxx>
- Subject: RE: Cliping cable to external (brick) walls.
- From: "Peter Heath" <ph236@xxxxxxx>
- Date: Wed, 22 Nov 2000 09:58:04 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Try putting the clips at a joint as close to the brick as possible. it
works
for me.
-----Original Message-----
From: Andy Harvey [mailto:andyharvey99@xxxxxxx]
Sent: 21 November 2000 17:29
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Cliping cable to external (brick) walls.
--- Stuart Grimshaw <stuart@xxxxxxx> wrote:
> I bashed my finger with a
> hammer today, while trying to clip some cable to the
> wall in the garage.
> The nails that come with the clips keep breaking or
> bending, and if they
> don't the brick chips away and the thing just falls
> out. Luckily it's just
> in the garage at the moment, so that's not too bad.
>
> Are there special clips for this, or should any do?
>
I usually replace the nail that comes the clip with a
suitably sized masonry nail.
--
Andy Harvey
andy@xxxxxxx
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
-------------------------- eGroups Sponsor -------------------------~-~>
Create your business web site your way now at Bigstep.com.
It's the fast, easy way to get online, to promote your business,
and to sell your products and services. Try Bigstep.com now.
http://click.egroups.com/1/9183/3/_/2065/_/974887285/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|