The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Quality Home Wi-Fi Networks with Ubiquiti UniFi


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Keith's KAT5s


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Keith's KAT5s
  • From: "Keith Doxey" <keith.doxey@xxxxxxx>
  • Date: Sat, 16 Dec 2000 01:16:57 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

There are several reasons for that.....

1. I have an interview for promotion at work on Monday and I have been
spending time preparing for that.

2. Loads of work at the "proper job" meaning a fair bit of
overtime.

3. STILL waiting for Farnell to send me a catalogue after asking 3 times.
Maybe it is out of print at the moment. :-(

The reason I need a catalogue is to find a suitable chip to replace the one
I was using. Maplin discontinued it, and one other which looked suitable is
out of stock everywhere. However I have just found what looks like a
suitable replacement and Farnell have it in stock. I will be ordering some
samples tomorrow to test it in the design before sending off the PCB
artwork
to have the boards made.

James Hoye has seen the finished prototype boards and they work really
well.
Having said that I spent about 2 hours tonight trying to determin what was
causing some strange patterning and colour splodges on one of my TV's. The
circuit was being fed over about 50 metres of CAT5 cable and I tried many
different tests to locate the problem. It turned out to be the SCART lead
plugged into the TV.....it was a crap unscreened lead that I had picked up
from somewhere and it would have shown patterning even with just a VCR
connected to the TV. Replaced the lead with a better quality one and I am
now watching Sky Digital upstairs in the bedroom in glorious stereo with
crystal clear pictures rather than the Mono RF signal we usually watch.

As soon as I get the new chips and confirm that they are OK, I will be
getting the boards made.

Keith

> -----Original Message-----
> From: Graham Kiff [mailto:graham.kiff@xxxxxxx]
> Sent: 15 December 2000 13:49
> To: UK HomeAutomation ListServer
> Subject: [ukha_d] Keith's KAT5s
>
>
> What's the current progress with Keith's KAT5 modules?  Haven't heard
too
> much of late!
>
> Graham
>


-------------------------- eGroups Sponsor -------------------------~-~>
Big News - eGroups is becoming Yahoo! Groups
Click here for more details:
http://click.egroups.com/1/10801/1/_/2065/_/976929503/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.