The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Fwd: Regarding your question about WebPAD Availability


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: X10 Problems


  • To: ukha_d@xxxxxxx
  • Subject: RE: Re: X10 Problems
  • From: Nigel Orr <nigel@xxxxxxx>
  • Date: Thu, 05 Oct 2000 08:23:10 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

At 08:34 05/10/00 +1300, you wrote:
>these lamps should not overheat, I have mine on for about 7 hours a day
on
>an appliance module.

Mine recommends not keeping it on for more than 6 hours.  7 is unlikely to
make a huge difference, but the gloop might need replacing sooner.  It
seems that shaking the thing is worse and less reversible than overheating-
a friend has one that you can barely see through, having tapped it
regularly to dislodge small blobs that sat on the top...

Nigel
nigel@xxxxxxx


-------------------------- eGroups Sponsor -------------------------~-~>
Get FREE long-distance phone calls on Tellme!
Click here for the scoop:
http://click.egroups.com/1/9531/9/_/2065/_/970730655/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.