[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: pronto delays and 543ah
- To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
- Subject: RE: pronto delays and 543ah
- From: Craig Callander <craig@xxxxxxx>
- Date: Wed, 15 Aug 2001 05:02:56 -0500
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Karl
Is
your 543 near the TV??
I
had
similar problem a couple of weeks back, turned out my 7243AH did not like
to be
located near the TV (even with the TV disconnected from mains and ariel
disconnected!!). I moved it 0.5m away from TV and it works fine now with
0.1s
delay. I seem to recall this fixed another members IR-X10 problems.
Could
try going to 0.2s delay.
HTH
Craig
I've had my 543AH IR thingy
for a few weeks now I have to say on the whole it seems to work quite
well.
Most of the time.
I suspect this has been touched on before
but....
I have fairly regular failures with x10 macros on the
pronto.
After spending some time pressing buttons and staring at the AH box, a
failure appears to coincide with three flashes of the led, success with
5.
Pressing a different button on the same house code after a failure
usually
results in 5 flashes, and my Homeseer log records something like
housecode,
unit code, unit code, command.
I interpret this as the AH missing
the command code at the end of the first transmission, then after
getting
the second transmission from the pronto, sending out house code, first
transmission unit code, second transmission unit code, second
transmission
command code.
Cutting to the chase, I have 0.1 s second delays
between
house, unit and command transmissions, is this enough?, Is it too much?
Do
people have different delays between house and unit and unit and
command?
What delays are you people using? I'm going to some experimenting but
I'm
lacking serial ports at the mo (thanks for that topic by the way) and
attaching the pronto to twiddle about is a pain in the butt.
Or
have
I missed the boat entirely? These toys are a bit tweaky aren't
they. Maybe
I should be hiding the receiver in a dark corner, switching off
the bathroom fan and putting a bucket on my
head.....................
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:
ukha_d-subscribe@xxxxxxx Unsubscribe:
ukha_d-unsubscribe@xxxxxxx List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
Yahoo! Groups
Sponsor |
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|