Re: LD11 failure?

["Russ Olivant" <egroups@xxxxxxx>]

I'd be interested in any answers or explanations t  this.
I posted last week regarding 2 LD11 units which had failed on me, 1 I took
apart, and the Voltage Dependant Resistor had blown itself apart. (See
http://www.amarok.demon.co.uk/dl/lw10u.html
for details of James Derrick's
LW10 failing)
The other I haven't taken apart yet, but I guess it has the same problem!
I'm probably going t  buy the components and try and solder them back onto
the PCB - I've nothing to loose :-)

Russ

----- Original Message -----
From: Mark Hetherington <mark.egroups@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Tuesday, July 17, 2001 8:59 PM
Subject: [ukha_d] LD11 failure?


> One of my LD11s appears t  have become inoperable. Fuse seems intact,
> bulb is checked, but neither the switch nor X10 commands will turn
> the light on.
>
> Wish LD11s had LEDs on them and overides as with AD10s :(
>
> So, how do I find out what is wrong with it? I have used a multimeter
> t  check the wiring and although I am not sure what I am looking for,
> the numbers coming through are comparable t  those on an adjacent
> working light and LD11 installation.
>
> Any ideas welcome.
>
> Thanks,
>
> Mark.
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/
>
>
>




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/