[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: LD11 failure?
- To: <ukha_d@xxxxxxx>
- Subject: RE: LD11 failure?
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Tue, 17 Jul 2001 22:01:48 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I assume you have removed power from it completely by turning the lighting
circuit breaker off (or pulling the fuse). Removing the fuse may not kill
all power t the module.
If you are lucky it may just have locked up. If not.......its an Ex-LD11
:-((
Keith
-----Original Message-----
From: Mark Hetherington [mailto:mark.egroups@xxxxxxx]
Sent: 17 July 2001 21:00
To: ukha_d@xxxxxxx
Subject: [ukha_d] LD11 failure?
One of my LD11s appears t have become inoperable. Fuse seems intact,
bulb is checked, but neither the switch nor X10 commands will turn
the light on.
Wish LD11s had LEDs on them and overides as with AD10s :(
So, how do I find out what is wrong with it? I have used a multimeter
to check the wiring and although I am not sure what I am looking for,
the numbers coming through are comparable t those on an adjacent
working light and LD11 installation.
Any ideas welcome.
Thanks,
Mark.
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|