The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Fw: [comfort] Unlimited IR is here!!!!


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: OT. Olympus Olycom m2280 PBX


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: OT. Olympus Olycom m2280 PBX
  • From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
  • Date: Fri, 2 Nov 2001 23:34:30 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Thanks Patrick, just reading my mails now! been a long week.

At the moment I have got an extension lead from the main in box through a
door jam (cannot close the door!) and onto the Meteor, and this works.

What I did before I bought the PBX was to run phone cable round the house
and fit outlets where ever I could be bothered to, I now have the PBX
plugged into one of these outlets but when I fitted a "splitter"
and plugged
both the Meteor and the PBX into the same socket the Meteor did not work, I
thought this to be strange as the Meteor is still between the master socket
and the PBX.

What I was hoping was that the PBX designers were smart enough to think of
this use at the design stage and devise a way to access the CID from the
unit.

No worries, I will cut the cable and insert another splitter to plug the
Meteor into just will not be as pretty.

Thanks.

B.



> -----Original Message-----
> From: patrickl@xxxxxxx [mailto:patrickl@xxxxxxx]
> Sent: 02 November 2001 09:01
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: OT. Olympus Olycom m2280 PBX
>
>
> --- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...> wrote:
> > Hi oh knowledgeable one's,
> >
> > Does anyone use/used the above telephone system?
> >
> > I have owned it for years and want to know if I can connect my
> Meteor to it
> > somehow to get the CID readings?
> >
>
> You need to connect your Meteor to the exchange line side of the
> PABX, in parallel with the PABX. You will not be able to get incoming
> CID data from the extension side. This obviously means that you will
> only be able to get CID data for one of the two incoming lines
> (unless you add a second Meteor for the second line).
>
> This should be easy to do - most Olycom's are supplied with flying
> leads which simply plug in to the BT master sockets. Insert a
> splitter into the master socket, and plug the meteor in the spare
> hole.
>
> Patrick
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.