[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Controling PC with IR and Girder
- To: <ukha_d@xxxxxxx>
- Subject: RE: Controling PC with IR and Girder
- From: "Nikola Kasic" <nikola@xxxxxxx>
- Date: Mon, 22 Apr 2002 10:58:56 +0100
- Delivered-to: ukha_archive@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
But
it's on the connector, which is presumably plugged in the back of PC. Does
it
work when it's plugged there, or you need to use extension cable to bring
it in
front where it's in line of sight of IR remote.
Nik
I followed a link
posted some time ago on this group
http://www.cesko.host.sk/girderplugin.htm
Software
to drive the circuit was also posted on this group
www.girder.nl
I made the circuit for a couple of pound and
it
controls Winamp &
Musicmatch a treat. I had some extra thoughts on
building the device and
distributing the signal via CAT5, I have taken
some
pictures and put
them on my humble website ?
Just click on the
automation link when the index page loads
http://www.jstarkie.co.uk/
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|