The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: PC PSUs...


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: PC PSUs...
  • From: "Timothy Morris" <timothy.morris@xxxxxxx>
  • Date: Mon, 22 Apr 2002 11:29:58 +0100
  • Delivered-to: ukha_archive@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Dunno Phil. I use an Enermax 430W in my PC. This is what was suggested
by the boys at overclockers.co.uk. (over and above your bog standard
300W) Apparantly modern AMD and Intel CPUs *can* get upset by lower
rated PSUs. You certainly need a new PSU with P4 mobos as they have a
new connector on them so you might as well chuck in an extra couple of
quid and get a higher rated one. Why you'd need 550W is anybody's guess.

Tim.

-----Original Message-----
From: Phil Harris [mailto:phil@xxxxxxx]
Sent: 21 April 2002 00:48
To: ukha_d@xxxxxxx Subject: [ukha_d] PC PSUs...


I have just been looking at PC PSU's (Ken is making me do it) as I have
an Althlon machine built into an old mini tower case which has a fairly
small PSU - certainly not Athlon or P4 approved!

Anyway, I assume the PSU is a tad underrated as sometimes when powering
up the Athlon machine the thing doesn't reach post and hangs but in my
other case with my other PSU works perfectly every time. OK ... So the
solution is a replacement PSU and I thought I'd look at chucking a meaty
one into the server and moving the current server one over to the
Athlon.

Looking around for meaty PSUs to power the server I see that Enermax do
a 550w unit which has the following ratings:

DC O/P     Output current rating
Voltage          MIN / MAX

3.3V              0A / 40A
+5V              11A / 46A
+12V              4A / 24A
-5V               0A / 1A
-12V              0A / 1A
+5Vsb             0A / 1.8A

3.3V & +5V        300W

TOTAL O/P         551W

Do modern mobo's *REALLY* pull up to 40A at 3.3v?

I want a meaty PSU to enable me to power more drives reliably but are
these 3.3v ratings just unrealistic in respect of the requirements of a
modern PC? I mean the 3.3 and 5v rails make up most of the rating of the
PSU but surely hard drives and CD Writers drain large 12v loads too?

Does anyone really know what current drains at each voltage PCs draw
these days?

Phil



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.