The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: back to basics - laying cables



Close, but no cigar:
 
Bear in mind this is only the master bedroom:
 
1: AV feed from baby cam to video switch
2: Audio feed from processor to rear channel amp (KAT5 TX) at front of room
3: Audio feed from processor to rear channel amp (KAT5 RX) at back of room
4: Rio
5: Spare lappy
 
... The wireless card is missing somewhere, I can't remember where I put it... When I find it, I'll still use three, for the main lappy, the spare lappy, and the Fujitsu.
 
 
Future expansion plans :
 
- Via PC displaying "Outlook today" onto TV
- IR send from HomeVision (in Node zero) to hi-fi rack
- Siteplayer to control the processor over serial port (so I can control sources / volume over the house Intranet as well as by remote)
- more cameras "gardenCam", say
- integration of the Meridian video switch with the KAT5 one :-)
 
Regards,

Mark
 
-----Original Message-----
From: BUTLER, Tony, FM [mailto:tony.butler@xxxxxxx]
Sent: 3 July 2002 13:01
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] back to basics - laying cables

AV Feed
Baby cam
Rio
Network
Telephone
 
Am I right?
Though network and telephone should be wireless by now!!!
 
And I agree - nowhere near enough.  Double it and you'll _still_ run out somewhere :-)
 
Tony
 
-----Original Message-----
From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
Sent: 03 July 2002 12:57
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] back to basics - laying cables

Be aware, that you're not fitting anything like enough!
 
I'm currently using 5 ports in the master bedroom, and will go to using 6 as soon as I collect the Via board that's currently at Mr. Hoye's...
 
Once it's in, you'll use it!!!
-----Original Message-----
From: TAWN Jonathan [mailto:jonathan.tawn@xxxxxxx]
Sent: 3 July 2002 12:16
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] back to basics - laying cables

Hi...

 

Ok - I'm going to start the slow process of re-decorating my house (mid-terace brick built)

 

I want to lay a quantity of cable around my house - to a small cupboard in the storeroom/soon to be office /box room...

 

However, the partition walls in my house are brick.. not the conventional stud (they are all supporting walls)

 

I want to lay 8 cat 5's in the front room.

4x in the dining room / dining kitchen

4 in the master bed room

4 in the spare room

and back to node 0 - the box room.

 

I also want to lay some more power cables + some speaker jack-points on the walls.

 

How do I go about laying the cable? - I presume I don't just lay the cable on the wall and then plaster over it?

 

Is there a trunking product or conduit available for me to adhere to the wall, to drop my cables down?

 

Any help really appreciated

 

Regards,

 

Jonathan.

 




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


********************************************************************
Visit our Internet site at http://www.rbsmarkets.com

This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised to
retain, read, copy or disseminate this message or any part of it.
********************************************************************

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________

Yahoo! Groups Sponsor
{short
description of image}

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.