|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: Re: Computer Controlled Underfloor heating |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: 433MHz Modules
Ok, whilst looking at pricing for modules
Found that Farnell now stock 868Mhz modules, which might be an
interesting way to go, does anyone have any experience of these ?
Cheers
Stuart
On Mon, 2002-06-17 at 13:55, Frank Mc Alinden wrote:
> Hurry up and finish the decking so that you can share those
electronic
> projects Ian.
>
> Frank Mc
> ----- Original Message -----
> From: "Ian Davidson" <ian@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Monday, June 17, 2002 3:01 AM
> Subject: Re: [ukha_d] 433MHz Modules
>
>
> > Hi Stuart
> >
> > At my old house I used my own modules on 433Mhz. They were some
cheap and
> > nasty modules that I used the case and 433 rx out of and added a
PIC with
> my
> > own software. I built a computer interface to allow the PC to TX
and RX on
> > 433Mhz. I also built a Hand held LCD device with a keypad to use
as a
> remote
> > for the HA but since moving it's all in a box in the desk. Be
warned 433
> can
> > become blocked easily and sometime not deliberately which would
disable
> all
> > your devices.
> >
> > I must admit since moving and trying more of the X10 stuff I am
not
> > impressed with it. I have a few idea's which I wanted to throw
around the
> > group for there opinions but I have been leaving it a while as I
am under
> > strict instructions from SWMBO not to start anymore of THOSE
electronic
> > projects until the decking in the garden is finished. I leave it
to your
> > imagination what I've been doing ALL weekend.
> >
> > Ian D
> >
> > ----- Original Message -----
> > From: "Stuart Poulton" <swp@xxxxxxx>
> > To: <ukha_d@xxxxxxx>
> > Sent: Sunday, June 16, 2002 4:20 PM
> > Subject: [ukha_d] 433MHz Modules
> >
> >
> > > Hi All,
> > >
> > > Can anyone advise on the suitability of 433MHz
technology, I'm
> planning
> > > to use this as an alternative to X10 for control and
telemetry wondered
> if
> > > anyone had an thoughts or show stoppers ( other than the
obvious X10
> ain't
> > > broke so don't fix it).
> > >
> > > Cheers
> > >
> > > Stuart
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|