RE: Re: Powermax alarms - Still ok?

["Justin" <justin@xxxxxxx>]

Thanks for clearing that up Mark.

Justin.

-----Original Message-----
From: Stainton-James, Mark (London) [mailto:stainmar@xxxxxxx]
Sent: 07 March 2002 12:11 PM
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] Re: Powermax alarms - Still ok?


>I had assumed that if PGM/X10 time was set to pulse 30s, if something
sent
>C4 ON then 30 secs later C4 would go off. Is that not the case, or does
it
>just not apply to an arming 'event'?

That is exactly the case. It is only the arming event that it doesn't apply
to - although they don't seem to have documented this fact !!!

The other thing that wasn't completely obvious to me at first was that for
each device number you can set many events for example A1 could be
triggered
by the AUX button or activating zone 1 or zone 4 or by arming

Hope this helps.

Mark

-----Original Message-----
From: Justin [mailto:justin@xxxxxxx]
Sent: 07 March 2002 12:02
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Re: Powermax alarms - Still ok?

I had assumed that if PGM/X10 time was set to pulse 30s, if something sent
C4 ON then 30 secs later C4 would go off. Is that not the case, or does it
just not apply to an arming 'event'?

That is exactly the case. It is only the arming event that it doesn't apply
to - although they don't seem to have documented this fact !!!

Taking the home/away mode a step further.. when the house goes into home
mode, and after a short delay, I will have HomeSeer announce something like
"Good morning/afternoon/evening. You have x new voicemail messages. To
hear
your messages now, press aux on your keyfob." Then maybe HS can fire
up the
kettle, turn on the TV and If it's a bit nippy, put the heating on!

This stuff is cool, just wish I had more time to play!


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/