The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: VGA to TV - Converter needed !


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: OT: PC problem that is driving me mad!



Thanks for all the suggestions. It turns out that slots four and six
share their (PCI) interrupt line with the on-board USB host controller.
Either the USB controller or the Adaptec SCSI controller doesn't
properly conform to the PCI 2.1 spec as moving the card to slot 5 seems
(fingers crossed) to have solved the problem :)

Tim.

> -----Original Message-----
> From: campbell@xxxxxxx > [mailto:campbell@xxxxxxx]
> Sent: 11 January 2003 22:06
> To: ukha_d@xxxxxxx > Subject: Re: [ukha_d] OT: PC problem that is driving me mad!
>
> I had this problem with an older Asus MB K7M which did not like a pci
> being
> put in slot 1 (which it shared with AGP) and slot 5 which was also
> shared....
>
> Since i avoided these slots, no problems...
>
> It was really annoying, especially when doing something important in a
> rush,
> it would seize nearly every time, now it works fine and seldom freezes
>
>
>
> Campbell
> ----- Original Message -----
> From: "Timothy Morris" <timothy.morris@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Saturday, January 11, 2003 6:35 PM
> Subject: [ukha_d] OT: PC problem that is driving me mad!
>
>
> > I've got a problem that is driving me mad!
> >
> >
> >
> > It could be related to a faulty SCSI terminator but then again..
> >
> >
> >
> > On an intermittent basis (more than 1x per day) my PC totally
freezes -
> > no blue screen - the desktop freezes and the HD light (connected to
an
> > Adaptec U160 SCSI card) stays permanently lit. I've got two drives
> > connected (both Maxtor Atlas 10K IIIs), none of which show errors.
> >
> >
> >
> > The XP error log looks fine, I've tried changing the cable, and
> > disconnecting one of the drives.
> >
> >
> >
> > I'm not 100% sure, but don't think it is a software issue as I've
> > recently rebuilt the Hard disk
> >
> >
> >
> > Short of building a duplicate PC and swapping out all the components
I'm
> > at a loss as to how to proceed.
> >
> >
> >
> > Tim.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx > > Subscribe:  ukha_d-subscribe@xxxxxxx > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > > List owner:  ukha_d-owner@xxxxxxx > >
> > List of UKHA Groups here -
> http://groups.yahoo.com/group/UKHA_Grouplists/
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>




http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.