[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: LV halogen wiring assembly.
- To: ukha_d@xxxxxxx
- Subject: RE: LV halogen wiring assembly.
- From: "Mark Marooth" <MMarooth@xxxxxxx>
- Date: Mon, 10 Mar 2003 10:06:30 +0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Stuart,
I have my LV transformers about 25 feet away from the furthest halogen.
What I
did was run individual 240v 60w twin core black lamp cable from B&Q
from the
lights back to the transformers. The lights are wired in a star
configuration
which gives each about 0.6% voltage drop.
I had found (perhaps coincidence) that wire wound transformers ran rather
warm
but when I replaced them with electronic ones, everything was cool !
If you have a look towards the bottom of this review, you can see some of
my
transformers and how they are connected to a terminal block.
http://www.automatedhome.co.uk/article.php3?story_id=1152
The red and blue wires you can see on the left of the photo connect
together
every alternate 2 terminals to give me 2 x 3 way which is 2 x 3 x 20W
halogen
sets.
HTH
Mark
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|