Re: Asterisk progress

["Dan" <dtoma@xxxxxxx>]

Hi Andy,

I have now 3 SIP phones behind a Netgear MR314 Wireless Broadband router.
I can place calls between those phones or outside in the same time without
any problems.
If you use X-Lite, Then I reccomend that in the *311 configuration page to
use different ports (signaling and RTP) for each phone.

BR,
Dan
P.S. Remember that we have tested this together sometimes ago.. (using
Cisco
7960 and SJPhone in the same time)

----- Original Message -----
From: "UKHA" <ukha@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, May 07, 2003 8:23 PM
Subject: Re: [ukha_d] Asterisk progress


> Dan,
>
> I think this may be ok for a single phone connection but you may run
into
> problems if someone tries to call another sip address at your site...
>
> Andy
>
> *********** REPLY SEPARATOR  ***********
>
> On 07/05/2003 at 18:25 Dan wrote:
>
> >For FWD you do not need a SIP enabled firewall (if NAT).
> >For something else, is enough to open and forward port 5060 and
two ports
> >for RTP (usualy 8000 and 8001).
> >I have test it and it is enough.
> >
> >BR,
> >Dan
> >
> >----- Original Message -----
> >From: "UKHA" <ukha@xxxxxxx>
> >To: <ukha_d@xxxxxxx>
> >Sent: Wednesday, May 07, 2003 5:30 PM
> >Subject: Re: [ukha_d] Asterisk progress
> >
> >
> >> >
> >> >Currently, I don't have any VoIP hardware and I am keen
to get some in
> >to
> >> >play, erm, evaluate. What hardware you would recommend or
suggest to
> >start
> >> >and from where? May be a couple of SIP phones and any
necessary PBX
> >> >hardware.
> >>
> >> I forgot to add to my last message to you Li that you'll need
either
some
> >sort of SIP aware firewall or will have to open up lots of ports
on your
> >existing one, the alternative is to stick the SIP proxy in your
DMZ and
> >give
> >it an IP (non-nat)
> >>
> >> Andy
> >>
> >>
> >>
> >>
> >> ** UKHA2003 BE THERE! Details here:
> >http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> >> http://www.automatedhome.co.uk
> >> Post message: ukha_d@xxxxxxx
> >> Subscribe:  ukha_d-subscribe@xxxxxxx
> >> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> >> List owner:  ukha_d-owner@xxxxxxx
> >>
> >> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >>
> >>
> >>
> >
> >
> >
> >
> >** UKHA2003 BE THERE! Details here:
> >http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> >http://www.automatedhome.co.uk
> >Post message: ukha_d@xxxxxxx
> >Subscribe:  ukha_d-subscribe@xxxxxxx
> >Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> >List owner:  ukha_d-owner@xxxxxxx
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> ** UKHA2003 BE THERE! Details here:
http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>