The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Powerline Ethernet Technology


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: UKHA2003 TiVo upgrade HD purchase



Ray,

Which Seagate drive is it? The Barracuda IV or the U6?

I agree with the quietness of them, on my main box I'm just swapped out a
Barracuda and replaced it with a
Maxtor Diamondmax 9. The Maxtor is driving me nuts with the constant head
seek noise...

However, I've had two Barracudas die on me in the last three months (hence
the Maxtor),
both less than a year old. One a 60GB, the other an 80GB. So I'm less than
impressed with the
reliability angle. Fingers crossed for the last good one in the main
server... :

Must add tho' that Seagate are to noted for their quick turnaround on the
warranty front, back from
the Netherlands in less than a fortnight.


-----Original Message-----
From: Ray Barnett [mailto:lists@xxxxxxx]
Sent: 11 May 2003 18:54
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] UKHA2003 TiVo upgrade HD purchase


FWIW, I've often heard it said that it's best to go for the 5400RPM drives
in TIVO because "7200RPM run hotter", yet I cannot say I've seen
any
evidence to back the claim up. When I researched which hard drive to use
for
my upgrade, I looked hard on the various forums and couldn't find anyone
who
had experienced problems that they put down to heat generated by the
harddrive.

In the end I decided that noise was by far my biggest concern. At the
time,
the quietest I could find was a 7200RPM Seagate. At 25dB I find it to be
inaudible. I've not found that TIVO is running any hotter or cooler than
it
was before I upgraded the drive. It has just been recording and
simulataneously playing back something for the past hour, and the
temperature is currently 35C.

It might be that 7200RPM do cause problems for some, but I thought it
worth
pointing out that I've not seen any issues, and there is far more choice
of
7200RPM drives, particularly in respect of noise, over 5400RPM drives.

HTH,

Ray Barnett.


[Non-text portions of this message have been removed]



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.