[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: wiring question (x10 related)
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: wiring question (x10 related)
- From: "Hawes,Timothy Edward (GEG)" <haweste@xxxxxxx>
- Date: Fri, 5 Sep 2003 12:45:23 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
John,
My house too is split left/right instead of up/down and in several places
lighting & power cables run together. IIRC with large bundles of cables
run together & X10, you can get interference between individual
circuits. Mike Huggins (of LetsAutomate) and (also IIRC) Mark McCall have
both experienced this, Mike wrote up some of his experiences at http://www.blackfirs.com not sure about
Mark though.
I'm no electrician, but I don't think that it contravenes the regs as it's
all the same voltage etc.
HTH,
Tim H.
> -----Original Message-----
> From: etj_webster
>
> The old wiring though had ring and lighing feeds all runing
> along the joists together, and sharing holes when running at
> right angles to the joists.
> Is this still okay, or would I be better toseprate them...
>
> Cheers,
> John.
+
Home |
Main Index |
Thread Index
|