Re: Sub output - T&E or STP ?

["Tim Hawes" <timsyahoo@xxxxxxxxxxxxxx>]

Put in one of each then if you ever change the sub in the future
you're covered. The KAT5 units seem to only require Cat5 UTP.

HTH,

Tim.

On 3/19/06, Gareth Cook <g@xxxxxxx> wrote:
> Ok - here's a question - I'm wiring up for a sub in the lounge, and
the
> amp is in Node 0. I have 2 choices to get a Phono feed in the wall -
> either 1.5mm T&E or CAT5 STP.
>
> What would be the usggestion as the best choice of the 2 ? I use
T&E for
> the speakers but then they are powered - the sub is line level. The
cable
> would be able 10 metres.
>
> G.