The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: PDA slots


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: 300GB Hard Drives



He he - I reckon most people's preference is basically whatever they
currently have, and the "wouldn't touch it with a barge pole" is
whatever they used to have.  To put it another way, if you've owned PCs
for enough years, you will have had a hard drive fail.  The unfortunate
manufacturer then goes in the "barge pole" category and you try
another
make.

Personally I wouldn't use Western Digital, but when I recall that the
only failure of one of their drives was one that was posted across the
Atlantic twice, maybe I'm being a bit harsh!

Mal



Phil Harris wrote:

>>I wouldn't touch Maxtor with a barge pole.
>>
>>
>
>See? ;-)
>
>
>
>>I have had over 5 Maxtor failures over the past years.
>>
>>
>
>I've had one Maxtor fail in the last 5 years and that was my own
fault...
>
>
>
>>Seagate on the other hand have had zero failures and I have
>>about 5 of them on 24/7.
>>
>>
>
>I've had 8 x 160Gb Maxtors running for the last 5 years and another 8 x
>160Gb Maxtors running for the last 3 years (so 16 in total) + 2 x 160Gb
>Hitachis for about the last 2 years ... All running 24/7.
>
>(Perhaps that explains why my leccy bill is now £80 a month?)
>
>
>
>>I recently changed to some Western Digital due to some people
>>suggesting that they were quieter at Storagereview.com.
>>
>>To be honest I have found the Seagates quieter.
>>
>>Seagate gets my vote - then comes Western Digital.
>>
>>Ho yin
>>
>>
>
>:-D
>
>Phil
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.