Re: Re: xAPTel not seeing outgoing calls

[Jon Whiten <jon.whiten@xxxxxxxxx>]

With the DECT phone, do you need to press a key after dialling the number?

;oj


On 5/24/05, slashcomfort <yahoo@xxxxxxx> wrote:
> found the issue, looks like its the dect phones it doesnt like.
> tried a normal phone, works fine. Tried dect phone, doesnt want to
> know - you can hear the dect phone sending the tones, why would ther
> meteor not pick it up, too quick?
>
> --- In xap_automation@xxxxxxx, Kevin Hawkins <lists@u...>
> wrote:
> > OOOPS  speed should be 1200 baud not 2400 baud !
> >
> > -also I assume you are using DTMF (tone) dialling and not
> rotary/pulse  ?
> >
> > Kevin
> >
> > Kevin Hawkins wrote:
> >
> > >Hmm curious - maybe there is a model of the Meteor that does
not
> support
> > >DTMF detection for outgoing calls. Is this an older Meteor ?
> > >
> > >You could tell via opening a Hyperterminal session at
2400baud
> 8bits
> > >noparity 1stop  no flow control to the COM port the Meteor is
> connected
> > >too. (quit xAPTel first of course) Now when you lift the tel
> handset you
> > >should see
> > >
> > >ON-LINE
> > >
> > >and when you dial a digit you should see the digit
displayed..
> > >
> > >replacing the handset will show OFF-LINE
> > >
> > >If you see the first ON-LINE message but not the digits then
I'm
> afraid
> > >your Meteor is not reporting the outgoing dialled digits
> > >
> > >Kevin
> > >
> > >slashcomfort wrote:
> > >
> > >
> > >
> > >>Hi
> > >>
> > >>just starting installing xap and have installed the
latest
> xAPTel
> > >>(intalled the latest beta3) connected to my Meteor (i
assume the
> mk2
> > >>as the connectors are not fixed). I all works fine with
incoming
> > >>numbers but doesnt register outgoing. (i can see xap
messages
> from the
> > >>unit when making a call but none have the number i've
dialed in
> them)
> > >>
> > >>any ideas? am i doing something wrong?
> > >>
> > >>thanks in advance
> > >>
> > >>Ade
> >
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>