[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Serial Bridge
Hi,
This is not really of any use to you, but I have had exactly the same
issue.
Unable to get any data except the heartbeat. Unfortunately Patrick,
does not seem to be answering any of the posts here or the msg I sent him.
Like you I have confirmed that the serial port and data are good, just
can't get the msgs onto the network.
Dan
--- In xap_automation@xxxxxxx, "Ian Davidson" <ian@...>
wrote:
>
> Hi
>
> I'm trying to get Patrick's serial bridge to work. I have a hub
running
> and the viewer and they can see my Xap traffic. I have run the bridge
> and it is seen in the viewer with a heartbeat every minute. I have
> specified com1 which it acquires correctly. I have com1 linked to com3
> via a serial cross over cable with HyperTerminal running connected to
> com3. (I have tested the com setup with two HyperTerminal windows and
> all is ok). I was expecting to get my Xap traffic out of the com port
> but no data is present. I also tried pasting a Xap packet into the
> HyperTerminal window but it did not show in the viewer although a saw
it
> go out of the port (TX light flicker). Do I need to do anything else?
>
>
>
> Thanks
>
>
>
> Ian D
>
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|