[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Resetting MV1000's
- Subject: RE: Re: Resetting MV1000's
- From: "Malcolm Surgenor" <malcolm@xxxxxxxxxxxx>
- Date: Fri, 5 Nov 2004 15:49:13 -0000
doesn't work for me. I've tried pushing the reset both before and after
the
initial green light flashes at power up. It then lights while you push it
and then goes out for around 40s before flashing once more. After that I
can
login via the serial port using nw-admin but still with my own password :(
Malcolm
-----Original Message-----
From: Ward, David [mailto:DAvid.Ward@xxxxxxx]
Sent: 05 November 2004 15:06
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] Re: Resetting MV1000's
Tim suggestted that it had to be pushed for a few seconds...
" If you keep it pushed for a few seconds you should see
the LED
flash green and then go off for 40 seconds and then relight. The
passwords
should then be set to nw-admin."
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|