Re: Re: xAP Stopped Working

[Marc Fuller <groups@xxxxxxxxxxxxxxxxxx>]

Hi Edward,

I think it's sorted, but not sure HOW it got sorted or what caused that
error.

I basically un-installed everything (including Homeseer, Redrat, Hubs...
the lot) and started from scratch.

I installed the new Hub first, then RedRat, then Homeseer... now this is
where it gets a tad weird. I wrote a VBS file to stagger the loading
to make sure the hub loads first, then RedRat, then Homeseer.

I thought that would fix it, but then when starting the hub I started
getting the AddressAlreadyInUse error. After running TCPVIEW it shows
that the RedRat process was using port 3639. Now I know for definite
that the hub loaded before the redrat.

So, I restarted, just loading the hub and not the rest. I still got the
error!!! TCPView didn't show 3639 in use by anything. Now I think this
was being caused because I noticed there is a service version of the hub
as well as the command line version. I didn't realize there was a
service version, so was loading the command line version.

Anyways, after sorting that, and running the xAP viewer, I could see
everything was working. Loaded the RedRat and Homeseer.. all working
lovely.. messages flowing, redrat working.. great.

Load TCPView and it shows Redrat as the process listening on port 3639!!!

Makes no damn sense to me, but since it's working, I backed away slowly
from the server, then ran !


Edward Pearson wrote:
>
>
> Did this get sorted.
>
>
>
> It?s odd since the normal error in the case that another application
is
> using the port is
>
> Failed to bind receive socket to 192.168.1.14:3639
(AddressAlreadyInUse)
>
>
>
> *From:* xap_automation@xxxxxxx
> [mailto:xap_automation@xxxxxxx] *On
Behalf Of *Brett England
> *Sent:* 21 July 2009 14:49
> *To:* xap_automation@xxxxxxx
> *Subject:* RE: [xap_automation] Re: xAP Stopped Working
>
>
>
>
>
> Use this to determine what is listening on this port already.
>
> http://technet.microsoft.com/en-us/sysinternals/bb897437.aspx
> <http://technet.microsoft.com/en-us/sysinternals/bb897437.aspx>
>
>
>
>
------------------------------------------------------------------------
>
> *From:* xap_automation@xxxxxxx
> [mailto:xap_automation@xxxxxxx] *On
Behalf Of *Marc Fuller
> *Sent:* 21 July 2009 14:46
> *To:* xap_automation@xxxxxxx
> *Subject:* Re: [xap_automation] Re: xAP Stopped Working
>
>
>
>
>
> Very very strange.
>
> I've unloaded everything. I've rebooted the server making sure
*nothing*
> loads automatically.
>
> I then run the Hub and still get the error! I have no clue what could
be
> grabbing it... apart from the IP address thing, nothing has
changed?!?!
>
> Is there way to find out what's using the port? I have a vague
> recollection of a command to see what ports are being used by what
> process.. something like netsh somethingorother?
>
> Cheers
>
> Marc
>
> Kevin Hawkins wrote:
>  >
>  >
>  > Almost certainly something else has already acquired the hub
port
>  >
>  > K
>  >
>  > Marc Fuller wrote:
>  > >
>  > >
>  > > OK, getting somewhere. The Redrat hub never gave me any
errors.
>  > >
>  > > Once I installed the new hub, I had assumed it was working,
but didn't
>  > > notice this little error...
>  > >
>  > > "Failed to bind receive socket to 172.16.xx.xx:3639
(AccessDenied)"
>  > >
>  > > What !! Why the hell would I be getting an access denied?
>  > >
>  > > Any help appreciated.
>  > >
>  > > Marc
>  > >
>  >
>  >
>
>


------------------------------------